Tool Documentation:

Unicornscan Usage Example

root@kali:~# unicornscan -mTsf -Iv -r 1000 192.168.0.102:a
adding 192.168.0.102/32 mode `TCPscan' ports `a' pps 1000
using interface(s) eth0
scaning 1.00e+00 total hosts with 6.55e+04 total packets, should take a little longer than 1 Minutes, 12 Seconds
connected 192.168.103.227:23221 -> 192.168.0.102:445
TCP open 192.168.0.102:445  ttl 128
connected 192.168.103.227:50006 -> 192.168.0.102:443
TCP open 192.168.0.102:443  ttl 128
connected 192.168.103.227:54487 -> 192.168.0.102:161
TCP open 192.168.0.102:161  ttl 128
connected 192.168.103.227:47765 -> 192.168.0.102:80
TCP open 192.168.0.102:80  ttl 128
connected 192.168.103.227:4267 -> 192.168.0.102:1884
TCP open 192.168.0.102:139  ttl 128
sender statistics 963.9 pps with 65536 packets sent total
listener statistics 131180 packets recieved 0 packets droped and 0 interface drops
TCP open                http[   80]     from 192.168.0.102  ttl 128
TCP open         netbios-ssn[  139]     from 192.168.0.102  ttl 128
TCP open                snmp[  161]     from 192.168.0.102  ttl 128
TCP open               https[  443]     from 192.168.0.102  ttl 128
TCP open        microsoft-ds[  445]     from 192.168.0.102  ttl 128
root@kali:~#


Packages and Binaries:

unicornscan

Unicornscan is a new information gathering and correlation engine built for and by members of the security research and testing communities. It was designed to provide an engine that is Scalable, Accurate, Flexible, and Efficient. It is released for the community to use under the terms of the GPL license. Benefits:

Unicornscan is an attempt at a User-land Distributed TCP/IP stack. It is intended to provide a researcher a superior interface for introducing a stimulus into and measuring a response from a TCP/IP enabled device or network. Although it currently has hundreds of individual features, a main set of abilities include:

- Asynchronous stateless TCP scanning with all variations of TCP Flags.
- Asynchronous stateless TCP banner grabbing
- Asynchronous protocol specific UDP Scanning (sending enough of a signature
to elicit a response).
- Active and Passive remote OS, application, and component identification
by analyzing responses.
- PCAP file logging and filtering
- Relational database output
- Custom module support
- Customized data-set views

Installed size: 3.77 MB
How to install: sudo apt install unicornscan

Dependencies:
  • flex
  • libc6
  • libpcap0.8
fantaip
root@kali:~# fantaip -h
FantaIP by Kiki
Usage: fantaip (options) IP
	-d		Detach from terminal and daemonize
	-H		Hardware address like XX:XX:XX:XX:XX:XX (otherwise use nics hwaddr)
	-h		help
	-i		*interface
	-v		verbose operation
*: Argument required
Example: fantaip -i eth0 192.168.1.7

unibrow
root@kali:~# unibrow --help
unibrow: invalid option -- '-'
Usage: unibrow:
	-i	*for pcap file to read
	-o	 for output file (append mode)
	-v	 verbose operation
	-h	 display help that you are reading
[*] required argument
pcap filter expression follows options, like unibrow -o new.conf -i file.pcap port 500 and udp

unicfgtst

unicornscan

(unknown subject)

root@kali:~# unicornscan -h
unicornscan (version 0.4.7)
usage: unicornscan [options `b:B:cd:De:EFG:hHi:Ij:l:L:m:M:o:p:P:q:Qr:R:s:St:T:u:Uw:W:vVzZ:' ] X.X.X.X/YY:S-E
	-b, --broken-crc     *set broken crc sums on [T]ransport layer, [N]etwork layer, or both[TN]
	-B, --source-port    *set source port? or whatever the scan module expects as a number
	-c, --proc-duplicates process duplicate replies
	-d, --delay-type     *set delay type (numeric value, valid options are `1:tsc 2:gtod 3:sleep')
	-D, --no-defpayload   no default Payload, only probe known protocols
	-e, --enable-module  *enable modules listed as arguments (output and report currently)
	-E, --proc-errors     for processing `non-open' responses (icmp errors, tcp rsts...)
	-F, --try-frags       
	-G, --payload-group	*payload group (numeric) for tcp/udp type payload selection (default all)
	-h, --help            help
	-H, --do-dns          resolve hostnames during the reporting phase
	-i, --interface      *interface name, like eth0 or fxp1, not normally required
	-I, --immediate       immediate mode, display things as we find them
	-j, --ignore-seq     *ignore `A'll, 'R'eset sequence numbers for tcp header validation
	-l, --logfile        *write to this file not my terminal
	-L, --packet-timeout *wait this long for packets to come back (default 7 secs)
	-m, --mode           *scan mode, tcp (syn) scan is default, U for udp T for tcp `sf' for tcp connect scan and A for arp
	                       for -mT you can also specify tcp flags following the T like -mTsFpU for example
	                       that would send tcp syn packets with (NO Syn|FIN|NO Push|URG)
	-M, --module-dir     *directory modules are found at (defaults to /usr/lib/unicornscan/modules)
	-o, --format         *format of what to display for replies, see man page for format specification
	-p, --ports           global ports to scan, if not specified in target options
	-P, --pcap-filter    *extra pcap filter string for reciever
	-q, --covertness     *covertness value from 0 to 255
	-Q, --quiet           dont use output to screen, its going somewhere else (a database say...)
	-r, --pps            *packets per second (total, not per host, and as you go higher it gets less accurate)
	-R, --repeats        *repeat packet scan N times
	-s, --source-addr    *source address for packets `r' for random
	-S, --no-shuffle      do not shuffle ports
	-t, --ip-ttl         *set TTL on sent packets as in 62 or 6-16 or r64-128
	-T, --ip-tos         *set TOS on sent packets
	-u, --debug		*debug mask
	-U, --no-openclosed	 dont say open or closed
	-w, --safefile       *write pcap file of recieved packets
	-W, --fingerprint    *OS fingerprint 0=cisco(def) 1=openbsd 2=WindowsXP 3=p0fsendsyn 4=FreeBSD 5=nmap
	                      6=linux 7:strangetcp
	-v, --verbose         verbose (each time more verbose so -vvvvv is really verbose)
	-V, --version         display version
	-z, --sniff           sniff alike
	-Z, --drone-str      *drone String
*:	options with `*' require an argument following them

  address ranges are cidr like 1.2.3.4/8 for all of 1.?.?.?
  if you omit the cidr mask then /32 is implied
  port ranges are like 1-4096 with 53 only scanning one port, a for all 65k and p for 1-1024
example: unicornscan -i eth1 -Ir 160 -E 192.168.1.0/24:1-4000 gateway:a

us
root@kali:~# us -h
unicornscan (version 0.4.7)
usage: unicornscan [options `b:B:cd:De:EFG:hHi:Ij:l:L:m:M:o:p:P:q:Qr:R:s:St:T:u:Uw:W:vVzZ:' ] X.X.X.X/YY:S-E
	-b, --broken-crc     *set broken crc sums on [T]ransport layer, [N]etwork layer, or both[TN]
	-B, --source-port    *set source port? or whatever the scan module expects as a number
	-c, --proc-duplicates process duplicate replies
	-d, --delay-type     *set delay type (numeric value, valid options are `1:tsc 2:gtod 3:sleep')
	-D, --no-defpayload   no default Payload, only probe known protocols
	-e, --enable-module  *enable modules listed as arguments (output and report currently)
	-E, --proc-errors     for processing `non-open' responses (icmp errors, tcp rsts...)
	-F, --try-frags       
	-G, --payload-group	*payload group (numeric) for tcp/udp type payload selection (default all)
	-h, --help            help
	-H, --do-dns          resolve hostnames during the reporting phase
	-i, --interface      *interface name, like eth0 or fxp1, not normally required
	-I, --immediate       immediate mode, display things as we find them
	-j, --ignore-seq     *ignore `A'll, 'R'eset sequence numbers for tcp header validation
	-l, --logfile        *write to this file not my terminal
	-L, --packet-timeout *wait this long for packets to come back (default 7 secs)
	-m, --mode           *scan mode, tcp (syn) scan is default, U for udp T for tcp `sf' for tcp connect scan and A for arp
	                       for -mT you can also specify tcp flags following the T like -mTsFpU for example
	                       that would send tcp syn packets with (NO Syn|FIN|NO Push|URG)
	-M, --module-dir     *directory modules are found at (defaults to /usr/lib/unicornscan/modules)
	-o, --format         *format of what to display for replies, see man page for format specification
	-p, --ports           global ports to scan, if not specified in target options
	-P, --pcap-filter    *extra pcap filter string for reciever
	-q, --covertness     *covertness value from 0 to 255
	-Q, --quiet           dont use output to screen, its going somewhere else (a database say...)
	-r, --pps            *packets per second (total, not per host, and as you go higher it gets less accurate)
	-R, --repeats        *repeat packet scan N times
	-s, --source-addr    *source address for packets `r' for random
	-S, --no-shuffle      do not shuffle ports
	-t, --ip-ttl         *set TTL on sent packets as in 62 or 6-16 or r64-128
	-T, --ip-tos         *set TOS on sent packets
	-u, --debug		*debug mask
	-U, --no-openclosed	 dont say open or closed
	-w, --safefile       *write pcap file of recieved packets
	-W, --fingerprint    *OS fingerprint 0=cisco(def) 1=openbsd 2=WindowsXP 3=p0fsendsyn 4=FreeBSD 5=nmap
	                      6=linux 7:strangetcp
	-v, --verbose         verbose (each time more verbose so -vvvvv is really verbose)
	-V, --version         display version
	-z, --sniff           sniff alike
	-Z, --drone-str      *drone String
*:	options with `*' require an argument following them

  address ranges are cidr like 1.2.3.4/8 for all of 1.?.?.?
  if you omit the cidr mask then /32 is implied
  port ranges are like 1-4096 with 53 only scanning one port, a for all 65k and p for 1-1024
example: unicornscan -i eth1 -Ir 160 -E 192.168.1.0/24:1-4000 gateway:a

Updated on: 2024-Mar-11