Tool Documentation:

jboss-autopwn Usage Example

Attack the target server (192.168.1.200) on the specified port (8080), redirecting stderr (2> /dev/null):

root@kali:~# jboss-linux 192.168.1.200 8080 2> /dev/null
[x] Retrieving cookie
[x] Now creating BSH script...
[!] Cound not create BSH script..
[x] Now deploying .war file:


Packages and Binaries:

jboss-autopwn

This JBoss script deploys a JSP shell on the target JBoss AS server. Once deployed, the script uses its upload and command execution capability to provide an interactive session.

Features include: - Multiplatform support - tested on Windows, Linux and Mac targets - Support for bind and reverse bind shells - Meterpreter shells and VNC support for Windows targets

Installed size: 114 KB
How to install: sudo apt install jboss-autopwn

Dependencies:
  • curl
  • metasploit-framework
jboss-linux
root@kali:~# jboss-linux -h
[v1.10-48]
connect to somewhere:	nc [-options] hostname port[s] [ports] ... 
listen for inbound:	nc -l -p port [-options] [hostname] [port]
options:
	-c shell commands	as `-e'; use /bin/sh to exec [dangerous!!]
	-e filename		program to exec after connect [dangerous!!]
	-b			allow broadcasts
	-g gateway		source-routing hop point[s], up to 8
	-G num			source-routing pointer: 4, 8, 12, ...
	-h			this cruft
	-i secs			delay interval for lines sent, ports scanned
        -k                      set keepalive option on socket
	-l			listen mode, for inbound connects
	-n			numeric-only IP addresses, no DNS
	-o file			hex dump of traffic
	-p port			local port number
	-r			randomize local and remote ports
	-q secs			quit after EOF on stdin and delay of secs
	-s addr			local source address
	-T tos			set Type Of Service
	-t			answer TELNET negotiation
	-u			UDP mode
	-v			verbose [use twice to be more verbose]
	-w secs			timeout for connects and final net reads
	-C			Send CRLF as line-ending
	-z			zero-I/O mode [used for scanning]
port numbers can be individual or ranges: lo-hi [inclusive];
hyphens in port names must be backslash escaped (e.g. 'ftp\-data').
[v1.10-48]
connect to somewhere:	nc [-options] hostname port[s] [ports] ... 
listen for inbound:	nc -l -p port [-options] [hostname] [port]
options:
	-c shell commands	as `-e'; use /bin/sh to exec [dangerous!!]
	-e filename		program to exec after connect [dangerous!!]
	-b			allow broadcasts
	-g gateway		source-routing hop point[s], up to 8
	-G num			source-routing pointer: 4, 8, 12, ...
	-h			this cruft
	-i secs			delay interval for lines sent, ports scanned
        -k                      set keepalive option on socket
	-l			listen mode, for inbound connects
	-n			numeric-only IP addresses, no DNS
	-o file			hex dump of traffic
	-p port			local port number
	-r			randomize local and remote ports
	-q secs			quit after EOF on stdin and delay of secs
	-s addr			local source address
	-T tos			set Type Of Service
	-t			answer TELNET negotiation
	-u			UDP mode
	-v			verbose [use twice to be more verbose]
	-w secs			timeout for connects and final net reads
	-C			Send CRLF as line-ending
	-z			zero-I/O mode [used for scanning]
port numbers can be individual or ranges: lo-hi [inclusive];
hyphens in port names must be backslash escaped (e.g. 'ftp\-data').
[v1.10-48]
connect to somewhere:	nc [-options] hostname port[s] [ports] ... 
listen for inbound:	nc -l -p port [-options] [hostname] [port]
options:
	-c shell commands	as `-e'; use /bin/sh to exec [dangerous!!]
	-e filename		program to exec after connect [dangerous!!]
	-b			allow broadcasts
	-g gateway		source-routing hop point[s], up to 8
	-G num			source-routing pointer: 4, 8, 12, ...
	-h			this cruft
	-i secs			delay interval for lines sent, ports scanned
        -k                      set keepalive option on socket
	-l			listen mode, for inbound connects
	-n			numeric-only IP addresses, no DNS
	-o file			hex dump of traffic
	-p port			local port number
	-r			randomize local and remote ports
	-q secs			quit after EOF on stdin and delay of secs
	-s addr			local source address
	-T tos			set Type Of Service
	-t			answer TELNET negotiation
	-u			UDP mode
	-v			verbose [use twice to be more verbose]
	-w secs			timeout for connects and final net reads
	-C			Send CRLF as line-ending
	-z			zero-I/O mode [used for scanning]
port numbers can be individual or ranges: lo-hi [inclusive];
hyphens in port names must be backslash escaped (e.g. 'ftp\-data').

jboss-win
root@kali:~# jboss-win -h
[v1.10-48]
connect to somewhere:	nc [-options] hostname port[s] [ports] ... 
listen for inbound:	nc -l -p port [-options] [hostname] [port]
options:
	-c shell commands	as `-e'; use /bin/sh to exec [dangerous!!]
	-e filename		program to exec after connect [dangerous!!]
	-b			allow broadcasts
	-g gateway		source-routing hop point[s], up to 8
	-G num			source-routing pointer: 4, 8, 12, ...
	-h			this cruft
	-i secs			delay interval for lines sent, ports scanned
        -k                      set keepalive option on socket
	-l			listen mode, for inbound connects
	-n			numeric-only IP addresses, no DNS
	-o file			hex dump of traffic
	-p port			local port number
	-r			randomize local and remote ports
	-q secs			quit after EOF on stdin and delay of secs
	-s addr			local source address
	-T tos			set Type Of Service
	-t			answer TELNET negotiation
	-u			UDP mode
	-v			verbose [use twice to be more verbose]
	-w secs			timeout for connects and final net reads
	-C			Send CRLF as line-ending
	-z			zero-I/O mode [used for scanning]
port numbers can be individual or ranges: lo-hi [inclusive];
hyphens in port names must be backslash escaped (e.g. 'ftp\-data').
[v1.10-48]
connect to somewhere:	nc [-options] hostname port[s] [ports] ... 
listen for inbound:	nc -l -p port [-options] [hostname] [port]
options:
	-c shell commands	as `-e'; use /bin/sh to exec [dangerous!!]
	-e filename		program to exec after connect [dangerous!!]
	-b			allow broadcasts
	-g gateway		source-routing hop point[s], up to 8
	-G num			source-routing pointer: 4, 8, 12, ...
	-h			this cruft
	-i secs			delay interval for lines sent, ports scanned
        -k                      set keepalive option on socket
	-l			listen mode, for inbound connects
	-n			numeric-only IP addresses, no DNS
	-o file			hex dump of traffic
	-p port			local port number
	-r			randomize local and remote ports
	-q secs			quit after EOF on stdin and delay of secs
	-s addr			local source address
	-T tos			set Type Of Service
	-t			answer TELNET negotiation
	-u			UDP mode
	-v			verbose [use twice to be more verbose]
	-w secs			timeout for connects and final net reads
	-C			Send CRLF as line-ending
	-z			zero-I/O mode [used for scanning]
port numbers can be individual or ranges: lo-hi [inclusive];
hyphens in port names must be backslash escaped (e.g. 'ftp\-data').
[v1.10-48]
connect to somewhere:	nc [-options] hostname port[s] [ports] ... 
listen for inbound:	nc -l -p port [-options] [hostname] [port]
options:
	-c shell commands	as `-e'; use /bin/sh to exec [dangerous!!]
	-e filename		program to exec after connect [dangerous!!]
	-b			allow broadcasts
	-g gateway		source-routing hop point[s], up to 8
	-G num			source-routing pointer: 4, 8, 12, ...
	-h			this cruft
	-i secs			delay interval for lines sent, ports scanned
        -k                      set keepalive option on socket
	-l			listen mode, for inbound connects
	-n			numeric-only IP addresses, no DNS
	-o file			hex dump of traffic
	-p port			local port number
	-r			randomize local and remote ports
	-q secs			quit after EOF on stdin and delay of secs
	-s addr			local source address
	-T tos			set Type Of Service
	-t			answer TELNET negotiation
	-u			UDP mode
	-v			verbose [use twice to be more verbose]
	-w secs			timeout for connects and final net reads
	-C			Send CRLF as line-ending
	-z			zero-I/O mode [used for scanning]
port numbers can be individual or ranges: lo-hi [inclusive];
hyphens in port names must be backslash escaped (e.g. 'ftp\-data').

Updated on: 2024-Mar-11